My EXata Connection Manager cannot connect with EXata. How do I fix this?
Article EXata Connection Manager  (CM) should be run on a computer that will connect with the EXata computer.
This allows the CM computer to be ‘mapped’ to any node in an EXata network. All traffic from the CM computer will ‘emerge’ from the mapped node in the EXata network and all traffic to it will be sent to the CM computer. Once mapped/connected the CM computer is using the hardware-in-the-loop capability of EXata, and is called a operational host.

To Connect the Connection Manager (CM) computer with EXata ensure that:
A.) The EXata and CM computers are on the same subnet
B.) You should be able to ping the EXata computer from the CM computer and vice-versa
C.) Add EXata and CM on the firewall exceptions list or disable the firewall. (Note firewall is required for the Internet Gateway feature)

The ‘Automatic’ search mode of CM will only work when a scenario is running in EXata in emulation mode.  

Article Details
Article ID: 63 Created On: 09 Dec 2009 5:33 PM

This article was helpful  This article was not helpful

 User Comments Add a Comment